About this Item
Details
The SoftStartHome 3 Ton is a compact yet powerful soft starter designed for residential air conditioners, heat pumps, pool heaters, and other motor-driven appliances up to 3 tons (36,000 BTUs). It reduces startup inrush current by up to 70%, allowing your equipment to start smoothly without tripping circuit breakers or overloading your power system. It is ideal for homes and off-grid power solutions, ensuring efficient operation even with limited power sources like small generators or solar battery systems.
Key Features
- Reduces Startup Power Demand: Lowers the initial surge current to prevent circuit breaker trips.
- Extends Equipment Lifespan: Reduces wear on compressors and motors for longer-lasting performance.
- Supports Backup Power: Enables AC units to start and run on smaller generators and solar power.
- Quiet Operation: Eliminates startup noise and provides a smoother running experience.
- Easy Installation: Installs in under 15 minutes with a complete installation kit.
- Universal Compatibility: Works with all major air conditioner and heat pump brands.
- Energy Efficient: Optimizes power distribution, allowing multiple appliances to operate simultaneously.
Why Choose SoftStartHome Energy System – Standard (3 Ton)
- Eliminates the need for expensive electrical upgrades or oversized generators.
- Provides reliable operation during power outages.
- Backed by a 3-year warranty and free technical support.
- Designed with durable, weather-resistant housing for long-term performance.
Specifications
- Model: SSH3T
- Maximum Capacity: Up to 3 tons (36,000 BTUs)
- Voltage Compatibility: 120V / 240V AC
- Maximum Operating Current: 16A
- Startup Inrush Current Reduction: Up to 70%
- Frequency: 50Hz / 60Hz
- Power Consumption: <1W in standby mode
- Generator Compatibility: Works with 2,000W or larger generators
- Solar & Battery Compatibility: Compatible with battery-stored solar power systems
- Ingress Protection (IP) Rating: IP65 (weather-resistant, suitable for outdoor use)
- Operating Temperature Range: -40°F to 185°F (-40°C to 85°C)
- Dimensions: 5.2" x 3.1" x 1.9" (132mm x 80mm x 48mm)
- Weight: 1.1 lbs (0.5 kg)
- LED Indicators: Status, Power, Error diagnostics
- Wiring Configuration: Supports L1, L2, and Ground connections
- Installation Time: Less than 15 minutes
- Warranty: 3 years (with registration)
Troubleshooting
Power and Connection Issues
- Q: The unit does not turn on. What should I do?
A: - Verify that the power supply is properly connected.
- Check that the circuit breaker or fuse is not tripped.
- Ensure correct wiring according to the installation guide.
- Confirm voltage compatibility (110V or 220V).
- Q: The LED indicators are not lighting up. What could be the issue?
A: - Ensure proper wiring and secure connections.
- Check for a blown fuse or tripped breaker.
- Confirm power is reaching the connection terminals.
Startup and Performance Issues
- Q: My air conditioner or heat pump still experiences high inrush current.
A: - Double-check wiring connections.
- Verify the SoftStartHome is securely grounded.
- Allow 3–5 startup cycles for the unit to optimize soft start functionality.
- Ensure the correct model is used for your system (SSH3T for up to 3 tons, SSH6T for up to 6 tons).
- Q: My generator shuts down when starting my A/C.
A: - Ensure the generator meets the minimum wattage requirement (2,000W for SSH3T, 3,000W for SSH6T).
- Allow multiple startup cycles for the SoftStartHome to learn the startup profile.
- Check that the generator is properly grounded.
- Q: My system runs fine on shore power but struggles with a generator.
A: - Confirm that the generator provides stable voltage without excessive fluctuation.
- Reduce the load by turning off other appliances.
- Try resetting the generator and restarting the system.
Installation and Wiring Issues
- Q: The system does not recognize the SoftStartHome. What should I do?
A: - Verify that all connections match the wiring diagram exactly.
- Recheck wiring and refer to installation guides.
- Ensure L1, L2, and Ground connections are properly installed.
- Q: My A/C worked before installation, but now it will not start.
A: - Check for any loose or disconnected wires.
- Temporarily remove the SoftStartHome and reconnect the system to its original wiring to test.
- Inspect the capacitor and compressor for any faults.
Operational Problems
- Q: The compressor is not starting, but the fan runs. What could be the issue?
A: - Confirm that the compressor is receiving power.
- Ensure proper wiring to the compressor.
- Check for any loose or incorrect connections.
- Q: My A/C or heat pump keeps tripping the breaker after installation.
A: - Verify that the breaker size matches the manufacturer’s recommendations.
- Ensure that all wires are tightly connected and installed correctly.
- Check if other high-power appliances are running on the same circuit.
- Q: The SoftStartHome unit is making a clicking noise. Is this normal?
A: - A soft clicking sound is normal during operation.
- If clicking is continuous and the system is not starting, check wiring and power supply.
Error Indicators and Fault Codes
- Q: The LED is flashing, but the system does not start. What should I do?
A: - Check the troubleshooting section of the manual for LED fault patterns.
- Look for error codes from the A/C system and reset if necessary.
- Power cycle the system by turning off the breaker for 5 minutes before restarting.
- Q: My HVAC system displays an error code after installation. What could be wrong?
A: - Some smart systems detect startup changes—try resetting the system.
- Ensure correct wiring to the compressor and power supply.
Performance Optimization
- Q: My A/C still makes a hard start noise after installing SoftStartHome.
A: - Allow multiple startup cycles for the unit to optimize performance.
- Check if multiple high-power devices are running on the same circuit.
- Ensure the SoftStartHome is properly grounded.
- Q: The system sometimes hesitates before starting. What causes this?
A: - A slight delay is normal as the SoftStartHome optimizes power flow.
- If hesitation is prolonged, inspect wiring and ensure all connections are secure.
Environmental and Weather Concerns
- Q: My SoftStartHome is installed outdoors. Does it need additional protection?
A: - The unit is IP65-rated and weather-resistant.
- For prolonged exposure to direct sunlight or heavy rain, consider additional shielding.
- Q: Can extreme temperatures affect performance?
A: - The SoftStartHome operates in temperatures ranging from -40°F to 185°F (-40°C to 85°C).
- In extreme cold or heat, check for secure and insulated wiring connections.
Q&A
General Questions
Q: What is the SoftStartHome 3 Ton?
A: The SoftStartHome 3 Ton is a compact soft starter designed for residential equipment up to 3 tons, including air conditioners, heat pumps, pool heaters, and other motor-driven devices. It reduces startup inrush current by up to 70%, ensuring smooth and efficient operation even with limited power sources.
Q: What types of equipment can I use with the SoftStartHome 3 Ton?
A: The SoftStartHome 3 Ton is compatible with various equipment such as air conditioners, heat pumps, pool heaters, and other motor-driven devices up to 3 tons.
Technical Questions
Q: What is the nominal working voltage for the SoftStartHome 3 Ton?
A: The nominal working voltage is 110VAC (90135VAC) & 220VAC (187266VAC), single phase.
Q: How much power does the SoftStartHome 3 Ton consume?
A: The SoftStartHome 3 Ton consumes less than 3W of power.
Q: What is the maximum continuous working current?
A: The maximum continuous working current is 16A.
Installation and Usage
Q: How easy is it to install the SoftStartHome 3 Ton?
A: The SoftStartHome 3 Ton can be installed in less than 15 minutes with the included installation kit, making it quick and easy to set up.
Q: Can the SoftStartHome 3 Ton be used with generators?
A: Yes, the SoftStartHome 3 Ton is compatible with small generators, including 2,000-watt generators, making it a versatile solution for various power sources.
Benefits
Q: How does the SoftStartHome 3 Ton extend equipment life?
A: By reducing startup inrush current and electrical strain during startup, the SoftStartHome 3 Ton extends the lifespan of your equipment by preventing power surges and minimizing mechanical stress.
Q: Can the SoftStartHome 3 Ton save me money?
A: Yes, the SoftStartHome 3 Ton avoids the need for expensive rewiring or larger generators, making it a cost-effective solution for home applications.
Safety and Protection
Q: What kind of protection does the SoftStartHome 3 Ton offer?
A: The SoftStartHome 3 Ton features built-in overload protection, ensuring enhanced protection for your devices and extending their operational life.
Q: Is the SoftStartHome 3 Ton weatherproof?
A: Yes, the SoftStartHome 3 Ton is designed to be compact and weatherproof, making it suitable for various environments.
Testimonials
Testimonial video 1
Share blog posts, products, or promotions with your customers. Use this text to describe products, share details on availability and style, or as a space to display recent reviews or FAQs.
FPO
Share blog posts, products, or promotions with your customers. Use this text to describe products, share details on availability and style, or as a space to display recent reviews or FAQs.
FPO
Share blog posts, products, or promotions with your customers. Use this text to describe products, share details on availability and style, or as a space to display recent reviews or FAQs.
Install Videos
INSTALL VIDEO
Share blog posts, products, or promotions with your customers. Use this text to describe products, share details on availability and style, or as a space to display recent reviews or FAQs.
FPO
Share blog posts, products, or promotions with your customers. Use this text to describe products, share details on availability and style, or as a space to display recent reviews or FAQs.
FPO
Share blog posts, products, or promotions with your customers. Use this text to describe products, share details on availability and style, or as a space to display recent reviews or FAQs.